Thursday, November 24, 2011

Direct-to-Card Printing

Direct-to-Card (DTC®) printing is the most common technology used by desktop card printer/encoders to transfer images directly onto a plastic ID card. DTC technology prints images by heating a print ribbon beneath a thermal printhead, resulting in the transfer of color from the ribbon to a blank card.
DTC card printing layers
Sharp edges, deep blacks and the full spectrum of colors
DTC technology uses two printing methods to achieve its incredible image quality:
Dye-sublimation prints smooth, continuous-tone images that look truly photographic. A dye-based ribbon is partitioned by multiple color panels, which are grouped in a repeating series of colors along the ribbon’s length.
A printhead containing hundreds of thermal elements heats the dyes, which vaporize and diffuse into the card surface. By combining colors and varying the heat used to transfer them, dye-sublimation is capable of producing up to 16.7 million colors.
Resin thermal transfer uses a single-color ribbon to print sharp black text and crisp bar codes, which can be read by both infrared and visible-light scanners. While this process uses the same thermal printhead as dye-sublimation, solid dots of color are transferred rather than a combination of colors.

Source: Fargo Website

Dye Sublimation vs Thermal Transfer

Thermal transfer printing and dye sublimation printing are used in both direct to card printers and retransfer printers. Direct to card printers merge the image directly on the surface of the card. Retransfer printing deposits the image on the back of a clear plastic film. This film is then bonded to the surface of a plastic card. Retransfer printing is the newest of these printing types and results in a better image result. The card design is applied to specialized cards and does not require a perfectly smooth card as the direct to card printers require.

Thermal Transfer Printing
Thermal printing is when resin or ink is melted off of a printer ribbon and is directly transferred to the retransfer film or the surface of the card. To melt the ink,a print head is used. The print head has heated pins that are aligned across a ceramic plate. In the correct sequence,the pins in the print head receive instructions to heat and release ink at just the right moment. The desired digital image created in the software is recreated on the card or ribbon.
Colored prints require the use of Y,M and C panels. As each panel passes over the card,dots of color are released resulting in the completed image. The K panel produces needed black printing on the card. Dithering allows the dots of different colors to be placed close together to create a blended shade when observed.
Monochrome printing is also available. This single color ribbon produces clear results with standard text and with bar codes. Monochrome printing is completed at high speeds and is often used to customize a preprinted card. The thermal ribbons provide durable print that resists fading. The resin dries quickly.

Dye Sublimation
Sublimation is when a solid is heated directly into a gaseous state. The solid bypasses the liquid state during heating. With this printing,the dye is heated to about 250 degrees Fahrenheit while the polymers in the PVC card are heated to 350 degrees. The gaseous dye penetrates the plastic and as the card cools,the dye chemically bonds with the plastic card.
Crisp,sharp images are printed with dye sublimation printing. Photographic images are printed with accuracy. The higher heat levels allow more dye to be released into the card surface. The result is the colors blend into a pleasing result as there is control over the opacity and transparency of the printing result.
Colors in this printing method are applied one panel at a time- the Y,M and C. This type of print is prone to fading when exposed to UV rays from the sun. Often a UV resistant topcoat is recommended to help protect the dye printed cards.

How does a YMCKO print ribbon work for an id card printer?

Dye sublimation id card machines use a print ribbon that contains panels of color and other needed layers. Each panel passes over the blank card in order until the panel pass is complete and the card contains the colors and overlays necessary to duplicate the design on the card.
The YMC are the three panels of color. Standing for yellow,magenta,and cyan,these panels orderly move over the card and provide the amount of color necessary to produce a full color image where needed and other colors desired according to the badge design.
Once the color has been placed on the card,the K panel of the id card printer ribbon passes over the card to provide resin black printing for black text and bar codes.
Using a YMCKO ribbon,the card is completed after the o panel has been applied to the card. This overlay panel is a clear protective panel that covers the colors on the badge.

Oracle

Oracle RAC - offers protection against server failure.
Oracle Automatic Storage Management - offers protection against storage failure.
Oracle Flashback - offers facility to undo mistake.
Oracle Data Guard manage the replication between 2 geographical sites (DC and DR).

With appropriately set-up Data Guard operations, DBAs can facilitate failovers or switchovers to alternative hosts in the same or alternative locations.
Oracle Corporation makes Data Guard available only as a bundled feature included within its "Enterprise Edition" of the Oracle RDBMS.

Active Data Guard is an added cost option bundled within "Enterprise Edition" of the Oracle RDBMS and allows purely read-only access.
The "Oracle Active Data Guard" option, an extra-cost facility, extends Oracle Data Guard physical standby functionality in Oracle 11g configurations. It allows read-only access on the standby node at the same time as archiving transactions from the primary node

Substantial costs savings are possible using Oracle Standard Edition (SE), Oracle Standard Edition One (SE1) or even Oracle Express (XE) with use of a third-party products to provide high availability for a database system.